Casting resins

Casting resins

NM El Epoxi 960

NM El Epoxi 960 is a two component low-viscosity epoxy resin for casting and impregnation. The resin is coloured dark blue. The air-release when casted is normally very good, but encapsulation of coils might need use of vacuum.
«Technical Datashet»

NM Gjutharts 094

NM Gjutharts 094 together with NM Hardener 093 C is a low viscosity epoxy resin for manufacturing of sand moulds and laminates.
The resin can be accelerated with up to 10% of NM Accelerator 254.
«Technical Datashet»

NM Gjutharts 179 V

NM Gjutharts 179 V / NM Hardener 2962 is a heat-resistant metalpowder filled epoxy designed for manufacturing of press-tools. The tools can either be made by a direct casting in a negative mould or by working with casted blocks. Surfaces that have been worked can be polished. NM Gjutharts 179 has a very low reactivity which means that the heat progress during the curing can be kept on a low level. The slow curing means that the air mixed in comes out before curing.
«Technical Datashet»

NM Gjutharts 179

NM Gjutharts 179 / NM Hardener 179B is a metal-powder filled epoxy designed for manufacturing of press-tools.
The tools can either be made by a direct casting in a negative mould or by working with casted blocks.
Surfaces that have been worked can be polished.
NM Gjutharts 179 has a very low reactivity which means that the heat progress during the curing can be kept on a low level. The slow curing means that the air mixed in comes out before curing. The disadvantage with a low reactivity is a long curing time before optimum qualities.
«Technical Datashet»

NM Gjutharts 347 with Hardener 175 or Hardener 348

NM Gjutharts 347 with NM Hardener 175 is a solvent free flexible epoxy system suitable for encapsulation of components that are exposed to great changes in temperature.
«Technical Datashet»