Gelcoats

Gelcoats

NM Gelcoat 095 V

A metal powder filled epoxy resin with a low coefficient of friction. NM Gelcoat 095 V is designed as a surface resin for moulds where there are high demands on durability, lack of pores and heat resistance.

NM Gelcoat 095 C

NM Gelcoat 095C with NM Hardener 101 is a metal powder filled epoxy resin with a low coefficient of friction. NM Gelcoat 095C is designed as a surface resin for moulds where there are high demands on durability and lack of pores.

NM Gelcoat 240

A solvent-free epoxy system for laminate surfaces on moulds. Replaces NM Gelcoat 230 as mould gel coat and NM Gelcoat 275 as surface gel coat.

NM Gelcoat 672

NM Gelcoat 672 is a heat resistant epoxy gelcoat to be used in moulds. By the manufacturing of large moulds, it could be difficult to laminate within the tacky window of the gelcoat. If the laminating should be done with an infusion technique, it is impossible to work with a tacky gelcoat. NM Gelcoat 672 is designed to guarantee an absolute adhesion between the cured and dry gelcoat surface and the laminate. This mean that two layers of gelcoat can be applied in one day, and the laminating can be done the next day.